Monsal Head to Ashford in the Water Loop

Starting near the picturesque village of Ashford in the Water, this 14 km (approximately 8.7 miles) loop trail offers a delightful mix of natural beauty and historical intrigue. With an elevation gain of around 400 meters (about 1,312 feet), the trail is rated as medium difficulty, making it accessible for most hikers with a moderate level of fitness.

### Getting There To reach the trailhead, you can drive to Ashford in the Water, located in Derbyshire, England. There is parking available near the village center. If you prefer public transport, the nearest train station is in Buxton, from where you can take a local bus to Ashford in the Water. The bus ride offers scenic views of the Derbyshire countryside, setting the tone for your hike.

### Trail Overview The trail begins in Ashford in the Water, a charming village known for its medieval Sheepwash Bridge. As you start your hike, you'll follow well-marked paths that lead you through rolling hills and lush meadows. The initial part of the trail is relatively flat, allowing you to ease into the hike.

### Monsal Head Approximately 4 km (2.5 miles) into the hike, you'll reach Monsal Head, one of the most iconic viewpoints in the Peak District. Here, you can take in panoramic views of the Monsal Dale and the River Wye below. The historic Monsal Viaduct, a relic of the Midland Railway, spans the valley and adds a touch of industrial heritage to the natural landscape. This is a great spot for a short break and some photography.

### Descending into Monsal Dale From Monsal Head, the trail descends into Monsal Dale. This section is a bit steeper, so take your time and watch your footing. The descent brings you closer to the River Wye, where you can enjoy the serene sounds of flowing water and perhaps spot some local wildlife, such as kingfishers and dippers.

### Upperdale and Cressbrook Continuing along the river, you'll pass through Upperdale and Cressbrook, small hamlets that offer a glimpse into rural life in Derbyshire. The trail here is relatively flat and easy, allowing you to enjoy the surrounding limestone cliffs and wooded areas. Keep an eye out for wildflowers and butterflies, especially in the warmer months.

### Climbing Back to Ashford in the Water As you loop back towards Ashford in the Water, the trail begins to climb again. This section involves a steady ascent, gaining around 200 meters (656 feet) over the next 3 km (1.9 miles). The effort is rewarded with stunning views of the surrounding countryside and the satisfaction of completing the loop.

### Historical Significance The area around Ashford in the Water and Monsal Head is rich in history. The Monsal Viaduct, built in the 1860s, was part of the Midland Railway's route connecting London to Manchester. Although the railway line was closed in the 1960s, the viaduct remains a testament to Victorian engineering. Additionally, Ashford in the Water has a history dating back to the Domesday Book, and its medieval bridge was once used for washing sheep, a practice that gave the bridge its name.

### Navigation and Safety For navigation, it's highly recommended to use the HiiKER app, which provides detailed maps and real-time updates. The trail is well-marked, but having a reliable navigation tool ensures you stay on track. Wear sturdy hiking boots, bring plenty of water, and pack some snacks or a light lunch to enjoy along the way.

This loop trail offers a perfect blend of natural beauty, historical landmarks, and moderate physical challenge, making it a must-do for hikers exploring the Peak District.